Maxx Ice MIM50 Manuel d'utilisation et d'entretien télécharger pdf (Page 24)

Description of LEDs and buttons:

1. Bin Full (Red) LED: Bin full indicator light

When this is lit, the ice storage bin is full of ice or there is some thing blocking the

bin-full probe. The unit will stop working. When ice cubes are removed from the ice

storage bin, freeing the bin-full probe, the red LED will remain flashing for 3 minutes,

then the unit will restart and return to the ice making mode.

2. Ice Making(Green) LED: Ice making indicator light

When this is lit, the unit is working in the ice making mode controlled by a

temperature probe on the evaporator. When the green LED flashes, the unit is working

in the ice making mode controlled by a fixed timer.

3. Ice Harvest (Yellow) LED: Ice harvest indicator light

When this is lit, the unit is working in the ice harvest mode controlled by the ice-full

probe.

When both the green and yellow LEDs are lit, the unit is in the cold preservation

mode.

4. Mode button: Mainly for service. When this is pressed, the ice making mode changes

to ice harvest mode or vice versa. The mode can be judged from the status of the green

and yellow LEDs.

MAJOR FUNCTIONS

1. The operating procedure is completely automatic.

2. When the ice storage bin is full of ice cubes，the machine stops making ice and

proceeds to the cold preservation stage automatically. It starts making ice again after

ice cubes are removed.

3. The different colors of the LED display indicate various work modes.

4. The fan motor responds to the ambient temperature. If it is cold, the motor will stop

working to keep the cooling system in good working condition.

5. A sensitive probe and accurate timer enhance the performance of the ice maker.

6. A compressor protection system is built in.

1 2 ... 19 20 21 22 23 24 25 26 27

Pas de commentaire

Maxx Ice MIM50 Manuel d'utilisation et d'entretien Page 24