Maxx Ice MIM50 Manuel d'utilisation et d'entretien télécharger pdf (Page 26)

24

Cubes are partially

formed or are white

on the bottom.

Not enough water in the

water trough.

Check if the water supply pressure is below

15 psig.

Check water supply or filter may be

restricted.

Check for a water leak at the water trough.

Noise during

operation

The feet are not leveled and

locked.

Level and lock the feet. See Leveling the Ice

Maker.

Certain sounds are normal.

See Normal Sounds.

The ice maker stops

suddenly while

making ice.

The electricity is off.

Reconnect the power supply line.

The room temperature is out

of the stated range.

Cut off the electricity and leave the ice

maker disconnected until the temperature

returns to within the stated range.

The ice storage bin is full of

ice.

Remove some ice cubes; make sure the

ice-full probe is free of ice.

The body of the ice

maker is electrified

The ground line isn't in the

socket.

Use a socket meeting the grounding

requirements.

Scaling occurs

frequently inside

the machine.

The hardness level of the

water is too high.

Install a water-softening device in front of

the water inlet.

Water leaks from

the ice storage bin

The drainhole below the ice

storage bin is blocked

Remove the ice storage bin and clean the

drainhole.

The drain hose is kinked or

improperly placed higher

than the floor of the ice

storage bin.

Check the drain hose to be sure water can

be drained out unhindered.

1 2 ... 21 22 23 24 25 26 27

Commentaires sur ces manuels

Pas de commentaire